Supero SUPERSERVER 6017R-TDF, Руководство пользователя

Страница: 47 / 106

Chapter 5: Advanced Serverboard Setup
5-15
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 CDC 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
NC = No connection
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off the
system. This button can also be confi g-
ured to function as a suspend button (with
a setting in the BIOS - See Chapter 7).
To turn off the power when the system is
in suspend mode, press the button for 4
seconds or longer. Refer to the table on
the right for pin defi nitions.
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Signal
2 Ground
Serial Ports
Two COM connections (COM1 & COM2)
are located on the serverboard. COM1
is located on the rear I/O panel. COM2,
located close to CPU Slot3, provides front
access support. See the table on the right
for pin defi nitions.
Universal Serial Bus (USB)
Four Universal Serial Bus ports (USB
0/1, USB 2/3) are located on the rear I/O
panel. In addition, three USB headers
provide four front-accessible USB con-
nections (USB 4/5, USB 8/9). One Type
A connector (USB6) also supports front
panel USB connection. (Cables are not
included). See the tables on the right for
pin defi nitions.
FP USB (4/5, 8/9, USB 6)
Pin Defi nitions
USB 4, 8, 6,
Pin # Defi nition USB 5, 9
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 NC 5 Key
Backplane
USB (0/1, 2/3)
Pin Defi nitions
Pin# Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 NA