Supero SUPERSERVER 6016TT-IBQF, Руководство пользователя

Страница: 43 / 100

Chapter 5: Advanced Serverboard Setup
5-9
5-6 Installing Memory
Memory Support
Each X8DTT-F/X8DTT-IBXF/X8DTT-IBQF has six 240-pin DIMM slots that can
support up to 48 GB of registered ECC DDR3-1333/1066/800 SDRAM (for a total
of 96 GB in the system) or up to 24 GB of ECC unbuffered DDR3-1333/1066/800
SDRAM (for a total of 48 GB in the system).
Note : Check the Supermicro web site for recommended DIMMs.
Installing Memory Modules
Insert each memory module vertically into a slot following the charts below. 1.
Pay attention to the notch along the bottom of the module to prevent inserting
it incorrectly.
Gently 2. press down on the DIMM module until it snaps into place in the slot
(see Figure 5-3).
!
CAUTION! Exercise extreme care when installing or removing
DIMM modules to prevent any possible damage.
Populating Memory for Optimal Performance
(Single CPU Confi guration)
Branch 0 Branch 1 Branch 2
3 DIMMs P1 DIMM1A P1 DIMM2A P1 DIMM3A
6 DIMMs P1 DIMM1A P1 DIMM1B P1 DIMM2A P1 DIMM2B P1 DIMM3A P1 DIMM3B
Populating Memory for Optimal Performance
(Dual CPU Confi guration)
CPU1 CPU2
Branch 0 Branch 1 Branch 3 Branch 0 Branch 1 Branch 3
6 DIMMs 1A 2A 3A 1A 2A 3A
12
DIMMs 1A 1B 2A 2B 3A 3B 1A 1B 2A 2B 3A 3B