Supero SUPERSERVER 5018R-M, Руководство пользователя

Страница: 93 / 130

Chapter 7: BIOS
7-11
P0 TotalTimeThreshold High
The hardware switching mechanism will disable the performance setting
when the total P0 time is greater than this threshold. Enter a numeric value.

Socket RAPL (Running Average Power Limit) Config
FAST_RAPL_NSTRIKE_PL2_DUTY_CYCLE
This feature displays the value of the item above within the range between 25
(10%) and 64 (25%).
Turbo Power Limit Lock
Select Enable to set the power use limit for the machine when it is running in
the turbo mode. The options are Enable and
Disable .
Long Power Limit Override
Select Enable to support long-term power limit override. If this feature is disabled,
BIOS will set the default value. The options are Enable and
Disable .
Long Duration Power Limit
This item displays the power limit set by the user during which long duration
power is maintained. The default setting is
0 .
Package Clamping Limit1
Use this item to set the limit on power performance states for the run-time proces-
sor, with P0 being the state with the highest frequency (clock speed) and power
(consumption), and P1, a step lower in performance than P0, with its frequency
and voltage scaled back a notch. The options are Between P1/P0 and
Below P1 .
Short Duration Power Limit Enable
Select Enable to support Short Duration Power Limit (Power Limit 2). The options
are
Enable and Disable.
Short Duration Power Limit
This item displays the time period during which short duration power is main-
tained. The default setting is
0 .
Package Clamping Limit2
Use this item to set the limit on power performance states for the processor
operating in turbo mode, with P0 being the state with the highest frequency
(clock speed) and power (consumption), and P1, a step lower in performance
than P0, with its frequency and voltage scaled back a notch. The options are
Between P1/P0 and
Below P1
.