Supero SUPERSERVER 5018A-TN4, Руководство пользователя

Страница: 56 / 114

5-14
S
UPER
S
ERVER 5018A-TN4 User's Manual
Watch Dog Timer Reset
The Watch Dog Timer (JWD1) is a sys-
tem monitor that can reboot the system
when a software application hangs.
Close Pins 1-2 to reset the system if
an application hangs. Close Pins 2-3 to
generate a non-maskable interrupt sig-
nal for the application that hangs. See
the table on the right for jumper settings.
Watch Dog must also be enabled in the
BIOS.
LAN Port Enable/Disable
JPL1 is used to enable or disable the
LAN Ports on the motherboard. See the
table on the right for jumper settings.
The default setting is enabled.
LAN Port Enable
Jumper Settings (JPL1)
Jumper Setting Definition
Pins 1-2 Enabled (default)
Pins 2-3 Disabled
PCI Slot_SMB Enable
Jumper Settings
Jumper Setting Definition
Short Enabled
Open (Default) Disabled
PCI-E Slot SMB Enable/Disable
Use Jumpers I
2
C1/I
2
C2 to enable PCI
SMB (System Management Bus) support
to improve system management for the
onboard PCI-E slot. See the table on the
right for jumper settings.
Watch Dog
Jumper Settings
Jumper Setting Definition
Pins 1-2 Reset (default)
Pins 2-3 NMI
Open Disabled