Supero SUPERSERVER 5018A-TN4, Руководство пользователя

Страница: 89 / 114

Chapter 7: BIOS
7-17
Device Power-Up Delay
Use the feature to set the maximum time a USB device will wait before report-
ing itself to the host controller. Select Auto to use the manufacturer's default
setting. Select Manual to set the default setting manually. The default setting
is
20 seconds
.

SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA Devices and displays the following items:
SATA 3 Controller
This feature allows the user to configure the settings of SATA 3.0 devices
SATA 3 Controller
Select Enabled to enable the onboard SATA 3.0 controller. The options are Enabled
and Disabled.
SATA Mode
This item sets SATA device mode. The options are IDE and AHCI .
LPM (Link Power Management)
Select Enabled to support Link Power Management to improve system power
management. The options are Disabled, and
Enabled .
ALPM (Aggressive Link Power Management)
Select Enabled to support Aggressive Link Power Management to enhance
system power performance. The options are Disabled, and
Enabled .
Overwrite SIR Values
Select Enabled to overwrite SIR values. The options are Enabled, and Disabled .
SATA Port 0/SATA Port 1
The submenu below allows the user to configure the following settings for SATA
Port 0 or SATA Port 1.
Spin Up
On an edge detect from 0 to 1, use this feature to set a COMRESET initialization
sequence for a device. The options are Enabled and
Disabled .