Supero SUPERSERVER 5018A-TN4, Руководство пользователя

Страница: 47 / 114

Chapter 5: Advanced Motherboard Setup
5-5
Memory Population Guidelines
Please follow the table below when populating memory slots.
Unbuffered DDR3 ECC SODIMM Memory
DIMM Slots per
Channel
DIMMs Populat-
ed per Channel
DIMM Type POR Speeds
Memory Population
Sequence
2 1
Unbuffered
DDR3 SODIMM
1600,1333 A1, B1 (2 DIMMs)
2 2
Unbuffered
DDR3 SODIMM
1600,1333
A1, B1, A2, B2
(4 DIMMs)
Note: Use memory modules of the same type, speed, frequency and size.
Module Notch
Module Notch
Module Key
Socket Key
5-6 Adding PCI Add-On Cards
The 5018A-TN4 can accommodate a single RSC-RR1U-E8 riser card to support
a PCI-E x8 add-on card
Installing an Add-on Card
1. Begin by removing the shield for the PCI slot where the riser card is located.
2. Fully seat the card into the riser card, pushing down with your thumbs evenly
on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the motherboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.