Supero SUPERSERVER 5017R-WRF, Руководство пользователя

Страница: 50 / 112

5-20
S
UPER
S
ERVER 5017R-WRF User's Manual
IPMB I
2
C
A System Management Bus header
for the IPMI slot is located at IPMB.
Connect the appropriate cable here
to use the IPMB I
2
C connection on
your system.
IPMB I
2
C
Pin Defi nitions (IPMB)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
Serial_Link-SGPIO
Pin Defi nitions
Pin# Defi nition Pin Defi nition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
T-SGPIO 1/2 & 3-SGPIO 1/2
Headers
Two T-SGPIO (Serial-Link General
Purpose Input/Output) headers are
located next to the I-SATA ports on
the motherboard. Additionally, two
3-SGPIO ports are also located next
to USB 8/9. These headers are used
to communicate with the enclosure
management chip in the system. See
the table on the right for pin defi nitions.
Trusted Platform Module Header
Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2
TPM Header
This header is used to connect to a
Trusted Platform Module (TPM), which
is available from third-party vendors. A
TPM is a security device that supports
encryption and authentication in hard
drives. It enables the motherboard to
deny access if the TPM associated
with the hard drive is not installed in
the system. See the table on the right
for pin defi nitions.
Note: NC indicates no connection.