manualshive.com logo in svg

Supero SUPERSERVER 5017C-LF, Руководство пользователя

Поделиться
Скачать
Supero SUPERSERVER 5017C-LF Скачать руководство пользователя страница 3

iii

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It 

provides information for the installation and use of the SuperServer 5017C-LF. In-

stallation and maintenance should be performed by experienced technicians only.

The SuperServer 5017C-LF is a high-end server based on the SC510L-200B 1U 

rackmount chassis and the Super X9SCL-F single processor serverboard.

Manual Organization

Chapter 1:  Introduction

The  fi rst chapter provides a checklist of the main components included with the 

server system and describes the main features of the X9SCL-F serverboard and 

the SC510L-200B chassis, which comprise the SuperServer 5017C-LF.

Chapter 2:  Server Installation

This chapter describes the steps necessary to install the SuperServer 5017C-LF 

into a rack and check out the server confi guration prior to powering up the system. 

If your server was ordered without processor and memory components, this chapter 

will refer you to the appropriate sections of the manual for their installation.

Chapter 3:  System Interface

Refer here for details on the system interface, which includes the functions and 

information provided by the control panel on the chassis as well as other LEDs 

located throughout the system.

Содержание SUPERSERVER 5017C-LF





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды