Supero SuperServer 5016I-MR, Руководство пользователя

Страница: 17 / 114

Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperServer 5016I-
MR/5016I-MRF up and running. Following the steps in the order given should
enable you to have the system operational within a minimal amount of time. This
quick setup assumes that your server system has come to you with the proces-
sor and memory preinstalled. If your system is not already fully integrated with a
motherboard, processor, system memory etc., please turn to the chapter or section
noted in each step for details on installing specifi c components.
2-2 Unpacking the System
You should inspect the box the SuperServer 5016I-MR/5016I-MRF was shipped
in and note if it was damaged in any way. If the server itself shows damage, you
should fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should
be situated in a clean, dust-free area that is well ventilated. Avoid areas where
heat, electrical noise and electromagnetic fi elds are generated. You will also need
it placed near a grounded power outlet. Read the Rack and Server Precautions
in the next section.
2-3 Preparing for Setup
The SuperServer 5016I-MR/5016I-MRF does not ship with a rack rail hardware
package as the system can be rack mounted without the use of rails. An optional
rack rail package is available if you wish to order from Supermicro. Follow the steps
in the order given to complete the installation process in a minimal amount of time.
Please read this section in its entirety before you begin the installation procedure
outlined in the sections that follow.
Choosing a Setup Location
•
Leave enough clearance in front of the rack to enable you to open the front door
completely (~25 inches) and approximately 30 inches of clearance in the back
of the rack to allow for suffi cient airfl ow and ease in servicing.This product is for