Supero SuperServer 5015M-MT Скачать руководство пользователя страница 70

Страница: 70 / 118

7-4

UPER

ERVER 5015M-MT/5015M-MT+ User's Manual

Legacy Diskette A

This setting allows the user to set the type of ﬂ oppy disk drive installed as diskette A.

The options are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5 in,

1.44/1.25MB,

3.5 in

and 2.88MB 3.5 in.

Parallel ATA

This setting allows the user to enable or disable the function of Parallel ATA. The

options are Disabled and

Enabled.

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The

options are Disabled and

Enabled.

Native Mode Operation

Select the native mode for ATA. The options are: Serial ATA and

Auto

SATA Controller Mode

Select

Compatible

to allow the SATA and PATA drives to be auto-detected and

placed in the Legacy Mode. Select Enhanced to allow the SATA and PATA drives

to be auto-detected and placed in the Native IDE Mode. (

*Note: The Enhanced

mode is supported by the Windows 2000 OS or a later version.)

When the SATA Controller Mode is set to "Enhanced", the following items will

display:

Serial ATA (SATA) RAID

Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS

environment, use the RAID driver if this feature is set to Enabled. If set to

Disabled

use the Non-RAID driver. When this feature--SATA RAID is set to Enabled, the

next item-"SATA AHCI Enable" will not be available.) The options are Enabled and

Disabled

(*Default).

*If this feature is set to "Enhanced", the following feature will be available:

SATA AHCI

Select Enable to enable the function of Serial ATA Advanced Host Interface.

(*Take caution when using this function. This feature is for advanced programmers

only.) The options are Enabled and

Disabled

ICH RAID CodeBase

Select Intel to enable Intel's ICH RAID Controller for the Windows OS. Select

Adaptec to enable Adaptec's RAID Controller for the Linux OS. The options are

Intel

and Adaptec.

Содержание SuperServer 5015M-MT























































































































Результаты поиска

Содержание SuperServer 5015M-MT

Отзывы:

Похожие инструкции для SuperServer 5015M-MT

Бренды по названию

Популярные бренды

Supero SuperServer 5015M-MT, Руководство пользователя

Результаты поиска

Содержание SuperServer 5015M-MT

Отзывы:

Похожие инструкции для SuperServer 5015M-MT

Бренды по названию

Популярные бренды