Supero SuperServer 5013G-M, Руководство пользователя

Страница: 72 / 104

7-8
S
UPER
S
ERVER 5013G-M Manual
it begins to repeat the keystroke. The settings are: " 250 ", "500", "750"
and "1000."
APIC Mode
This setting allows you to Enable or Disable APIC. APIC is used to assign
interrupt signals to a specific processor on multi-processor system and
provides IRQs beyond the conventional 16 under Windows 2000 or XP. It
has no effect on single processor systems.
OS Select For DRAM > 64MB
This setting should be changed only if using OS2 and your system has more
than 64 MB of RAM. The options are "OS2" and " Non-OS2 ".
Console Redirection
When Enabled, the console (display) can be redirected via the COM port.
When Disabled , console redirection is attempted only if keyboard is absent.
Agent After Boot
When Enabled, the agent will continue running after boot up. The default
setting is Disabled .
PWRON After PWR-Fail
This setting allows the user to specify how the system will respond when
power is reapplied after the system has gone down due to a power failure.
The options are " Off ", "On" and "Former-Sts".
Full Screen Logo Show
The options for this setting are "Enabled" and " Disabled ". This refers to
the logo that appears when your computer boots up.
Voice Warning Output (P4SGA/P4SGL only)
This setting allows you to turn the Voice BIOS on or off. Voice BIOS is a
new feature that gives you verbal (spoken) details of the POST (Power On