Supero SuperServer 5013G-M, Руководство пользователя

Страница: 52 / 104

5-18
S
UPER
S
ERVER 5013G-M Manual
USB Wake-Up
Use JPUSB to enable or disable
USB Wake-Up, which allows you
t o w a k e u p t h e s y s t e m b y d e -
pressing a key on the keyboard or
by clicking the mouse when either
is connected to the USB0 or USB1
port. This jumper is used together
with the USB Wake-Up function in
BIOS. Enable both the jumper and
the BIOS setting to allow the sys-
tem to be woken up. See the table
on the right for jumper settings.
Jumper
Position
1-2
2-3
Definition
Disabled
Enabled
USB W ake-Up
Jumper Settings
(JPUSB)
Watch Dog Enable/Disable
J P 2 e n a b l e s a n d d i s a b l e s t h e
Watch Dog function. Watch Dog
is a system monitor that will re-
start the system if a software ap-
plication freezes operations. This
jumper is used together with the
W a t c h D o g e n a b l e f u n c t i o n i n
BIOS. Enable both the jumper and
the BIOS setting to use the Watch
Dog feature. See the table on the
right for jumper settings.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
W atch Dog Enable
Jumper Settings (JP2)
Front Side Bus Speed
JP1 is used to set the system
(front side) bus speed for the pro-
cessors. It is best to keep this
jumper set to Auto. This jumper is
used together with the CPU Clock
setting in BIOS. See the table on
the right for jumper settings.
Jum per
Position
Pins 1-2
Pins 2-3
Open
Definition
Auto
400 M Hz
533 M hz
Front Side Bus Speed
Jumper Settings (JP1)