Supero SUPERSERVER 1027R-72RFTP, Руководство пользователя

Страница: 71 / 130

Chapter 5: Advanced Serverboard Setup
5-25
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
Gigabit LAN port, one LED indicates
activity when blinking while the other
LED may be green, amber or off to
indicate the speed of the connection.
See the table on the right for the func-
tions associated with the connection
speed LED.
N o t e : F o r T L A N 1 / 2 L E D
indicators,please refer to JF2 and
LEB7 on Page 5-21.
LAN LED
Connection Speed Indicator
LED Color Definition
Off No connection or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
Green 1 Gbps (when LAN 1~4
are all used for 1G con-
nections.
ME Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Manufacture Mode
Pins 2-3 Normal (Default)
Manufacture Mode
Jumper JPME1 allows the user to flash
the system firmware from a host server
to modify system settings. Close this
jumper to bypass SPI flash security,
and force ME into Recovery mode
in order to use Recovery jumpers.
See the table on the right for jumper
settings.
ME Recovery
Close Jumper JPBR1 to use ME
Firmware Recovery mode, which will
limit system activities to support es-
sential functions only. There will be no
power use restrictions. In the single
operational mode, online upgrade will
be available via the Recovery mode.
See the table on the right for jumper
settings.
ME Recovery
Jumper Settings
Jumper Setting Definition
Closed ME Recovery
Open Normal (Default)
Activity LED Link LED