Supero SuperServer 1026GT-TF, Руководство пользователя

Страница: 68 / 104

6-8
S
UPER
S
ERVER 1026GT-TF Series User's Manual
6-5 Power Supply
The 1026GT-TF series server includes a 1400 Watt power supply. This power sup-
ply is auto-switching capable. The power supply automatically sense and operates
at a 100v to 240v input voltage.
Power Supply Replacement
If the power supply unit fails, the system will shut down and you will need to replace
the unit. Replacement units can be ordered directly from Supermicro (see contact
information in the Preface). As there is only one power supply unit in the SC118G
chassis, power must be completely removed from the server before removing and
replacing the power supply unit.
Replacing the Power Supply
Power down the server and unplug the power cord. 1.
Push the release tab on the front of the power supply. 2.
Lift the handle of the power supply. 3.
Pull the power supply out of the power supply bay. 4.
Push the new power supply module into the power bay until it clicks into the 5.
locked position.
Plug the AC power cord back into the module and power up the server. 6.
Figure 6-7: Removing the Power Supply
1
2
1
4
1 3