Supero Supero X7QC3, Руководство пользователя

Страница: 63 / 108

Chapter 4: AMIBIOS
4-7
Floppy Confi guration
This option allows the user to confi gure the settings for the Floppy Drives installed
in the system.
Floppy A/Floppy B
Move the cursor to these fi elds via the up and down arrow keys to select the
fl oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB
3½", 1.44 MB 3½” , and 2.88 MB 3½".
PCI/PnP Confi guration
This feature allows the user to set the PCI/PnP confi gurations for the following
items:
Clear NVRAM
Select Yes to clear NVRAM during system boot. The options are Yes and No.
Pl
ug & Play OS
Select Yes to allow the OS to confi gure Plug & Play devices. (*This is not required
for system boot if your system has an OS that supports Plug & Play.) Select No
to allow the AMI BIOS to confi gure all devices in the system.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Se-
lect 64 to set the PCI latency to 64 PCI clock cycles. The default setting is 64 .
Allocate IRQ to PCI VGA
Select Yes to allow the system to give the VGA adapter card an interrupt address.
The options are Yes and No.
Palette Snooping
Select Enabled to inform the onboard PCI devices that an ISA graphics device
is installed in the system in order for the graphics card to function properly. The
options are Enabled and Disabled .
PCI IDE BusMaster
Select Enabled to allow the BIOS to use the PCI busmaster to read from and write
to the onboard IDE drives. The options are Enabled and Disabled.
Offboard PCI/ISA IDE Card
This option allows the user to assign a PCI slot number to an off-board PCI/ISA
IDE card in order for it to function properly. The options are Auto , PCI Slot1, PCI
Slot2, PCI Slot3, PCI Slot4, PCI Slot5, and PCI Slot6.