Supero Supero X7QC3, Руководство пользователя

Страница: 16 / 108

1-10
X7QC3/X7QCE User's Manual
1-3 Special Features
Recovery from AC Power Loss
BIOS provides a setting for you to determine how the system will respond when
AC power is lost and then restored to the system. You can choose for the system
to remain powered off (in which case you must hit the power switch to turn it
back on) or for it to automatically return to a power-on state. See the Power Lost
Control setting in the Advanced Setup section to change this setting. The default
setting is Last State .
1-4 PC Health Monitoring
This section describes the PC health monitoring features of the X7QC3/X7QCE.
All have an onboard System Hardware Monitor chip that supports PC health
monitoring.
Onboard Voltage Monitors for the CPU Cores, Chipset Voltage,
Memory Voltage, +1.8V, +3.3V, +5V, +12V, -12V, +3.3V Standby,
+5V Standby and VBAT.
An onboard voltage monitor will scan these voltages continuously. Once a voltage
becomes unstable, a warning is given or an error message is sent to the screen.
The user can adjust the voltage thresholds to defi ne the sensitivity of the voltage
monitor.
Fan Status Monitor with Firmware Control
The PC health monitor can check the RPM status of the cooling fans. The onboard
CPU and chassis fans are controlled by Thermal Management via BIOS (under
Hardware Monitoring in the Advanced Setting).
Environmental Temperature Control
The thermal control sensor monitors the CPU temperature in real time and will
turn on the thermal control fan whenever the CPU temperature reaches a user-
defi ned threshold. The overheat circuitry runs independently from the CPU. Once
it detects that the CPU temperature is too high, it will automatically turn on the
thermal fan control to lower the CPU temperature. The onboard chassis thermal
circuitry can monitor the overall system temperature and alert the user when the
chassis temperature is too high.
CPU Overheat LED and Control
This feature is available when the user enables the CPU overheat warning feature
in the BIOS. This allows the user to defi ne an overheat temperature. When the
CPU temperature reaches the pre-defi ned threshold, both the overheat fan and
the warning LED are triggered.