Supero Supero SuperServer 5037C-T, Руководство пользователя

Страница: 47 / 90

Chapter 5: Advanced Motherboard Setup
5-23
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each Giga-
bit LAN port, the yellow LED indicates
activity when blinking while the other LED
may be green, amber or off to indicate the
speed of the connection. See the table on
the right for the functions associated with
the connection speed LED.
LAN LED
Connection Speed Indicator
LED State Defi nition
Off No connection or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
Onboard Standby PWR LED
Status
Status Defi nition
Off Power Supply is Off (Hard
Switch)
On Power Supply is On (Hard
Switch).
Onboard Power LED (LE2)
An onboard Power LED is located at LE2
on the motherboard. This LED will be on
when the system is running.
Unsupported Memory LED (LE3)
LE3 is located next to LE2. When LE3
blinks, it is an indication/warning that
unsupported memory is installed in one
(or more) of the memory slots.
Unsupported Memory LED Indicator
Indication
Yellow: Blinking Unsupported Memory
is Installed
Onboard Standby Power LED (LE4)
An onboard Standby Power LED is located
at LE4. This LED will be on whenever the
AC power cable is connected and the
power supply hard switch is on. Make
sure to disconnect the power cable before
removing or installing any components.
Onboard PWR LED
Status
Status Defi nition
Off System Off (Soft Switch)
On System is Running
Rear UID LED (LE5)
The rear UID LED is located at LE5 on the
backpanel. This LED is used in conjunction
with the rear UID switch to provide easy
identifi cation of a system in a stack.
Rear UID LED
Indication
Blue: Solid UID Toggled On