Supero Supero SuperServer 5037C-T, Руководство пользователя

Страница: 34 / 90

5-10
S
UPER
S
ERVER 5037C-T User's Manual
5-5 Installing Memory
Note: Check the Supermicro web site for recommended memory modules.
CAUTION
Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage.
Installing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with slots
DIMM1A. Pay attention to the notch along the bottom of the module to pre-
vent inserting the DIMM module incorrectly. See Figure 5-5.
2. Gently press down on the DIMM module until it snaps into place in the slot.
Repeat fstep 1 to install to DIMM1B if needed.
Memory Support
The X9SCA supports up to 32GB of ECC unbuffered (UDIMM) DDR3-1333/1066
memory in four memory slots. Populating these slots with a pair of memory mod-
ules of the same type and same size will result in interleaved memory, which will
improve memory performance. Please refer to the table below:.
DDR3 Unbuffered ECC (UDIMM) Memory
DIMM Slots
per Channel
DIMMs
Populated per
Channel
DIMM Type POR Speeds Ranks per DIMM
(any combination)
2 1 Unbuffered
DDR3
1066, 1333 Single Rank, Dual
Rank
2 2 Unbuffered
DDR3
1066, 1333 Single Rank, Dual
Rank
Slot 1, Channel 1
Slot 1, Channel 2
(Blue Slot)
Slot 2, Channel 2
(Blue Slot)
Slot 2, Channel 1