Supero Supero SuperServer 5037C-T, Руководство пользователя

Страница: 36 / 90

5-12
S
UPER
S
ERVER 5037C-T User's Manual
5-6 Adding PCI Expansion Cards
Six standard size PCI expansion cards (the maximum number supported by the
motherboard) may be added to the 5037C-T.
Installing Expansion Cards
1. Disconnect the chassis from any power source.
2. Depress the release latch which holds the protective bracket (B) and secures
the add-on card brackets to the chassis.
3. Lower the protective bracket over the top of the expansion card dummy
brackets as shown in the lower illustration.
4. Remove the expansion card dummy brackets from their slots.
5. Simultaneously, slide the expansion card and its bracket into the slot on the
chassis, and insert the expansion card into its slot on the motherboard.
6. If desired, screws can be used to secure the expansion card into the chassis.
7. Close the protective bracket over the tops of the expansion card brackets.
Full-Height, Full-Length Expansion Card Setup
The SC732 chassis includes clips to accomodate the use of full-height, full-length
expansion cards. These clips support and stabilize the cards, preventing them from
contacting any other surfaces.
1. Locate the card holders, which are located on the opposite side of the chassis
from the add-on card brackets (at front of chassis).
2. Begin by installing the card as described in the previous section.
3. Push the card holder all the way down onto the end of the card to secure it in
the chassis.