Supero Supero SUPERSERVER 5017A-EP, Руководство пользователя

Страница: 49 / 102

Chapter 5: Advanced Motherboard Setup
5-5
Insert this end fi rst
Press down until the module
locks into place.
Locking clip
Locking clip
To Remove :
Use your thumbs to gen-
tly push the side clips
near both ends away from
the module. This should
release it from the slot.
Pull the SODIMM module
upwards.
Press down until the mod-
ule locks into place. The
side clips will automati-
cally secure the SODIMM
module, locking it into
place.
5-6 Adding PCI Add-On Cards
The 5017A-EP can accommodate a single full-height, half-length add-on (expan-
sion) card.
Installing an Add-on Card
1. Begin by removing the shield for the PCI slot where the riser card is located.
2. Fully seat the card into the riser card, pushing down with your thumbs evenly
on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the motherboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.