Supero Supero SUPERSERVER 5017A-EP, Руководство пользователя

Страница: 48 / 102

5-4
S
UPER
S
ERVER 5017A-EP User's Manual
5-4 Onboard Processor and Heatsink
The X9SCAA features an embedded Intel® ATOM N2800 processor.
5-5 Installing Memory
Caution! Exercise extreme care when installing or removing DIMM modules to
prevent any possible damage.
Note : Check the Supermicro website for a list of memory modules that have been
validated with the X9SCAA motherboard.
How to Install SO DIMMs
1. Insert the desired number of SO DIMMs into the memory slots, starting with
DIMMA1, then DIMMB1. Pay attention to the notch along the bottom of the
module to prevent incorrect DIMM module installation.
2. Insert each SO DIMM module vertically and snap it into place. Repeat step 1
to install DIMMB1 if needed. See instructions on the next page.
Memory Support
The X9SCAA Motherboard Series supports up to 4GB (2 x 2GB) of unbuffered
Non-ECC DDR3 1066MHz SODIMMs in two low-profi le horizontal slots.
Align
Position the SODIMM
module's bottom key so
it aligns with the receptive
point on the slot. Insert
the SODIMM module verti-
cally at about a 45 degree
angle.