Supero SUPER P6DLE, Руководство пользователя

Страница: 25 / 66

1-17
Chapter 1: Introduction
1-2 PC Health Monitoring
This section describes the PC health monitoring features of SUPER
P6DLS/P6DLE/P6SLS/P6SLA. They have an on-board LM78 Sys-
tem Hardware Monitor chip which can support PC health monitor-
ing.
Seven On-Board Voltage Monitors for the CPU Core/s,
CPU I/O, +3.3V,
±±
5V, and
±±
12V
The on-board voltage monitor will scan the seven monitored volt-
ages every second. Once a voltage becomes unstable, it will report
a warning or an error message on the screen. Users can adjust
the threshold of the monitored voltage to determine the sensitivity of
the voltage monitor.
Three-Fan Status Monitors with Firmware/Software
Control On/Off
The PC health monitor can check the RPM status of the cooling
fans. The on-board 3-pin CPU fan is controlled by the ACPI BIOS
and the ACPI enabled operating system. The thermal fans are con-
trolled by the overheat detection logic.
CPU/Chassis Temperature Control
The thermal control sensor will monitor the real-time CPU tempera-
ture. It will turn on the back-up fan whenever the CPU temperature
goes over the user-defined threshold. The overheat circuitry runs
independently from the CPU. It can still monitor the overheat condi-
tion even if the CPU is in sleep mode. Once it detects that the CPU
temperature is too high, it will automatically turn on the back-up fan
to prevent any overheat damage to the CPU. The on-board chassis
thermal circuitry can monitor the overall system temperature and
alert users when the chassis temperature is too high.