Supero SUPER P3TDDE, Руководство пользователя

Страница: 80 / 96

5-10
S
UPER P3TDDE User's Manual
5. In the “Install Drivers” dialog box, press “Have Disk…”
6. When the “Install From Disk” appears, insert the “FastTrak100 Driver” diskette in
drive A:.
7. Type “A:\NT4” in the text box window, then choose “OK.”
8. When the “Install Driver” dialog box appears, select “Win NT Promise FastTrak100
Controller” and then press “OK.”
9. When the “Select SCSI Adapter Option” dialog box appears, press “Install.”
10. After a successful installation, the “SCSI Adapter Setup” box will show that the
“Win NT Promise FastTrak100 Controller” has been installed.
11. Power off your system.
12. If moving the boot drive to the FastTrak card, now attach the hard drives (see page
Error! Bookmark not defined. otherwise reboot.
Removing the Driver from Windows NT 4.x
1. From the “Start” Button choose “Control Panel” in “Setup” group.
2. In “Control Panel,” select “SCSI Adapter,” next choose “Drivers” label
3. Choose “Remove” button.
4. After successful removing, the “SCSI Adapter Setup” box will show that “Win NT
FastTrak100 RAID Controller” has been removed.
5-3 Frequently Asked Questions
This section lists frequently asked questions involving pre-installation, drive issues,
installation, and post-installation.
Pre-Installation
(Speed, Device Types, Capacity, Cabling)
Q: What kind of hard drives can I use for a FastTrak100 array?
A: You can use any IDE/EIDE hard drive(s) to create arrays on the FastTrak100.
You should use matching drives for multiple-drive arrays to maximize capacity usage
as well as performance. Ultra ATA/100 drives are recommended for highest
performance.
Q: Will APM (Advanced Power Management) work with HDDs on the
FastTrak100?
A: APM will not work with HDDs on the FastTrak100. This is because the system
sees the card as a SCSI card.