Supero SUPER P3TDDE, Руководство пользователя

Страница: 75 / 96

5-5
Chapter 5: FastTrak 100 RAID Controller
Microsoft Millennium
Installing Drivers During Millennium Installation
The following details the installation of the FastTrak100 drivers while installing
Microsoft’s Millennium (with the FastTrak100 controller card already in place). If you
are installing the FastTrak100 drivers on a system with Millennium already installed,
see “Installing Drivers with Existing Millennium System.”
1. Install Microsoft Millennium fully.
2. After installation, go the “Start” menu and choose “Settings.”
3. From the “Settings” menu, choose “Control Panel.”
4. In the “Control Panel” window, double-click on the “System” icon.
5. In the “System” window, choose the “Device Manager” tab.
6. In the hierarchical display under “Other Devices” is a listing for “PCI RAID Controller.”
Choose it and then press the “Properties” button.
7. Choose the “Driver” tab in the “Properties” window, choose “Update Driver,” and
then press “Next.”
8. Choose “Search for a better driver than the one your device is using now
(recommended),” then press “Next.”
9. Choose “Specify Location,” and then type “A:\WINME” in the text box.
10. Insert the “FastTrak100 Driver” diskette into the A: drive.
11. Press the “Next” button. A message informing you that Windows Millennium has
found “Windows Millennium Promise FastTrak100 Controller” should appear.
12. Press “Next,” then “Finish,” then “Yes” when asked if you want to restart your
computer. Be sure to remove the diskette from drive A:.
Installing Drivers with Existing Millennium System
The following section details the installation of FastTrak100 drivers on a system that
has Millennium already installed and running. If you’re installing the Ultra100 drivers
on a system during an installation of Millennium, see “Installing Drivers During
Millennium Installation.”
1. After installing the FastTrak100 controller card and configuring the hard drives,
power up the system and boot.
2. The “Add New Hardware Wizard” will appear, informing you that it has found a “PCI
RAID Controller.”
3. Click on “Next,” and from the generated list box, choose “Search for a better driver
than the one your device is using now.”
4. Click on “Next,” and from the generated choices, choose “Specify a location.”
5. Insert the “FastTrak100 Driver” diskette in drive A:.
6. Type “A:\WINME” in the text box that appears.