Supero SUPER 370SWD, Руководство пользователя и BIOS

Страница: 38 / 90

2-8
SUPER 370SWD/370SWT/370SWM
Manual
Installation
Table 2-12
Fan Connector Pin Definitions
(FAN1, FAN2, FAN3)
Pin
N u m b e r
1
2
3
Definition
Ground (black)
+12V (red)
T a c h o m e t e r
* Caution: These fans headers
are DC power.
Pin
N u m b e r
1
2
3
Definition
+ 5 V S t a n d b y
G r o u n d
W a k e - u p
Table 2-11
Wake-On-LAN
Pin Definitions (WOL)
Wake-On-LAN
The Wake-On-LAN connector is lo-
cated on WOL. Refer to Table 2-11
for pin definitions. You must enable
the LAN Wake-Up setting in BIOS to
use this function (p. 4-15). (You
must also have a LAN card with a
Wake-on-LAN connector and cable
to use this feature.)
Fan Headers*
The thermal control fan header is lo-
cated on FAN3. The CPU and chas-
sis fan headers are located on FAN1
and FAN2, respectively. Refer to
Table 2-12 for pin definitions.
Universal Serial Bus
(USB)
The two Universal Serial Bus con-
nectors are located on J32 and J33.
See Table 2-9 for pin definitions.
Table 2-9
Universal Serial Bus Pin Definitions
Pin
N u m b e r
Definition
1 + 5 V
2 P 0 -
3 P 0 +
4 G r o u n d
5 N / A
Pin
N u m b e r
Definition
1 + 5 V
2 P 0 -
3 P 0 +
4 G r o u n d
5 K e y
J32
J33
Serial Ports
A connector for serial port COM1
is located on J34. A header for
serial port COM2 is located just
behind COM1. See Table 2-10 for
pin definitions. A 10-pin serial
ribbon cable is required if connect-
ing a device to COM2 (not
included).
Table 2-10
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 D C D
2 D S R
3 Serial In
4 R T S
5 Serial Out
Pin Number Definition
6 C T S
7 D T R
8 RI
9 G r o u n d
10 N C