Supero SUPER 370SWD, Руководство пользователя и BIOS

Страница: 28 / 90

S
UPER 370SWD/370SWT/370SWM
Manual
1-20
Introduction
1-5 Power Supply
As with all computer products, a stable power source is necessary for
proper and reliable operation. It is even more important for processors that
have high CPU clock rates of 300 MHz and above.
The SUPER 370SWD/370SWT/370SWM accommodates ATX power supplies.
Although most power supplies generally meet the specifications required by
the CPU, some are inadequate.
It is highly recommended that you use a high quality power supply that
meets ATX power supply Specification 2.01. Additionally, in areas where
noisy power transmission is present, you may choose to install a line filter
to shield the computer from noise. It is recommended that you also install a
power surge protector to help avoid problems caused by power surges.
Note: To support the keyboard wake-up function, your power supply must
be ATX 2.01 or higher and must provide a minimum standby voltage of 720
mA.
case the system malfunctions and you want to turn off the power, just
depress and hold the power button for 4 seconds. The power will turn off
and no power will be provided to the motherboard.
External Modem Ring-On
Wake-up events can be triggered by a device such as the external modem
ringing when the system is in the SoftOff state. Note that external modem
ring-on can only be used with an ATX 2.01 (or above) compliant power
supply.
Wake-On-LAN (WOL)
Wake-On-LAN is defined as the ability of a management application to re-
motely power up a computer that is powered off. Remote PC setup, up-
dates and asset tracking can occur after hours and on weekends so that
daily LAN traffic is kept to a minimum and users are not interrupted.
The motherboards have a 3-pin header (WOL) to connect to the 3-pin
header on a Network Interface Card (NIC) that has WOL capability. Note
that Wake-On-Lan can only be used with an ATX 2.01 (or above) compliant
power supply.