Supero SUPER 370DL3, Руководство пользователя

Страница: 77 / 94

Chapter 4: BIOS
4-17
BIOS
Overheat Warning Temperature
Use this option to set the CPU overheat warning temperature. The
settings are
25 °C
through
75 °C
in 1 °C intervals.
Note: The Optimal
and Fail-Safe default settings are 55 °C
.
H/W Monitor CPU
H/W H/WMonitor (+5V)
H/W Monitor (+12V)
CPU1 Fan
CPU2 Fan
The above features are for PC Health Monitoring. The motherboards with
W83781D have seven onboard voltage monitors for the CPU core, CPU I/
O, +3.3V, +5V, -5V, +12V, and-12V, and for the four-fan status monitor.
OnBoard FDC
This option enables the FDC (Floppy Drive Controller) on the motherboard.
The settings are Auto, Disabled and Enabled .
OnBoard Serial Port1
This option specifies the base I/O port address of serial port 1. The
settings are Disabled , 3F8h , 2F8h , 3E8h and 2E8h .
OnBoard Serial Port2
This option specifies the base I/O port address of serial port 2. The
settings are
Disabled
,
3F8h
,
2F8h
,
3E8h
and
3BC
.
Onboard Parallel Port
This option specifies the base I/O port address of the parallel port on the
motherboard. The settings are Auto (AMIBIOS automatically determines
the correct base I/O port address), Disabled , 378h , 278h and 38Ch .
Parallel Port Mode
This option specifies the parallel port mode. The settings are
Normal , Bi-Dir, EPP and ECP . When set to Normal, the normal
parallel port mode is used. Use Bi-Dir to support bidirectional
transfers. Use EPP (Enhanced Parallel Port) to provide asymmetric
bidirectional data transfer driven by the host device. Use ECP
(Extended Capabilities Port) to achieve data transfer rates of up to
2.5 Mbps. ECP uses the DMA protocol and provides symmetric
bidirectional communication.