Supero SUPER 370DL3, Руководство пользователя

Страница: 73 / 94

Chapter 4: BIOS
4-13
BIOS
USB Resume
When in the AMP mode, this option allows you to wake up the system
from a USB device. The settings for this option are
Enabled
and
Disabled
.
PME Resume
When in the AMP mode, this option allows you to wake up the system
from a PME device. The settings for this option are Enabled and Dis-
a b l e d .
R1 Resume
When in the AMP mode, this option allows you to wake up the system
from a R1 device. The settings for this option are Enabled and Dis-
a b l e d .
PCI/Plug and Play Setup
Plug and Play-Aware OS
The settings for this option are No or Yes . Set this option to Yes to
allow the operating system to detect ISA Plug and Play devices. (Since
the S2QR6 has no ISA slots, this should always be set to No .
PCI Latency Timer (PCI Clocks)
This option specifies the latency timings in PCI clocks for all PCI devices.
The settings are 32 , 64 , 96 , 128 , 160 , 192 , 224 , or 248 .
PCI VGA Palette Snoop
The settings for this option are Disabled or Enabled. When set to
Enabled,
multiple VGA devices operating on different buses can handle
data from the CPU on each set of palette registers on every video device.
Bit 5 of the command register in the PCI device configuration space is the
VGA Palette Snoop bit (0 is disabled). For example: if there are two
VGA devices in the computer (one PCI and one ISA) and this option is
disabled, data read and written by the CPU is only directed to the PCI
VGA device's palette registers. If enabled, data read and written by the
CPU is directed to both the PCI VGA device's palette registers and the
ISA VGA palette registers. This will permit the palette registers of both
devices to be identical. This option must be set to Enabled if any ISA
adapter card installed in the system requires VGA palette snooping.