Supero SUPER 370DL3, Руководство пользователя

Страница: 58 / 94

3-4
S
UPER S2DL3/370DL6/370DL3/370DLE User's Manual
Troubleshooting
the BIOS image (xxxxxx.rom) files. Copy these files onto a bootable floppy
and reboot your system. It is not necessary to set BIOS boot block protec-
tion jumpers on the motherboard. At the DOS prompt, enter the command
"fwhflash." This will start the flash utility and give you an opportunity to
save your current BIOS image. Flash the boot block and enter the name of
the update BIOS image file.
N o t e : I t i s i m p o r t a n t t o s a v e y o u r c u r r e n t B I O S a n d r e n a m e i t
"super.rom" in case you need to recover from a failed BIOS update.
Select flash boot block, then enter the update BIOS image. Select "Y" to
start the BIOS flash procedure and do not disturb your system until the
flash utility displays that the procedure is complete. After updating your
BIOS, please clear the CMOS then load Optimal Values in the BIOS.
Question: After flashing the BIOS my system does not have video.
How can I correct this?
Answer: If the system does not have video after flashing your new BIOS, it
indicates that the flashing procedure failed. To remedy this, first clear CMOS per
the instructions in this manual and retry the BIOS flashing procedure. If you still
do not have video, please use the following BIOS Recovery Procedure. First,
make sure jumper JP6 is disabled. Then, turn your system off and place the
floppy disk with the saved BIOS image file (see above FAQ) in drive A.
Press and hold <CTRL> and <Home> at the same time, then turn on the
power with these keys pressed until your floppy drive starts reading. Your
screen will remain blank until the BIOS program is done. If the system
reboots correctly, then the recovery was successful. The BIOS Recovery
Procedure will not update the boot block in your BIOS.
Question: Do I need the CD that came with your motherboard?
Answer: The supplied compact disc has quite a few drivers and programs
that will greatly enhance your system. We recommend that you review the
CD and install the applications you need. Applications on the CD include
chipset drivers for Windows and security and audio drivers.
Question: Why can't I turn off the power using the momentary
power on/off switch?
Answer: The instant power off function is controlled in BIOS by the Power
Button Mode setting. When the On/Off feature is enabled, the motherboard