Supero Super 370DE6, Руководство пользователя

Страница: 40 / 104

2-4
S
UPER 370DE6/370DER/370DEI User's Manual
Installation
2-3 Installing DIMMs
NOTE: Check the Supermicro web site for recommended memory
modules:
http://www.supermicro.com/TECHSUPPORT/FAQs/Memory_vendors.htm
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage. Also note that the
memory is interleaved to improve performance (see step 1).
DIMM Installation (See Figure 2-2)
1. Insert either two or four DIMMs as required for the desired system
memory. Two-way interleaved memory requires that memory
modules be installed in pairs(-first in the two slots of Bank0 and
then in both slots of Bank1, if
needed).
2. Insert each DIMM module vertically into its slot. Pay attention to the
two notches along the bottom of the module to prevent inserting the
DIMM module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the
slot. Repeat for all modules (see step 1 above).
Support
The 370DE6/370DER/ only supports ECC registered SDRAM
memory. PC133 and PC100 memory are both supported at their respec-
tive speeds. However, the memory bus is synchronized to the front side
bus speed, so using PC100 with a 133 MHz FSB or using PC133 with a
100 MHz FSB, will result in 100 MHz memory speed operation in either
case.