Supero SC847BE1C series Скачать руководство пользователя страница 114

Страница: 114 / 116

E-2

SC847BE1C/2C Chassis Manual

E-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest back-

plane revision available at the time of publishing. The card you have received may

or may not look exactly the same as the graphics shown in this manual.

E-4 The BPN-SAS3-846EL Front Backplane

The BPN-SAS3-846EL backplane has been designed to utilize the most up-to-date

technology available, providing your system with reliable, high-quality performance.

This manual relects BPN-SAS3-846EL Revision 1.01, the most current release

available at the time of publication. Always refer to the Supermicro website at www.

supermicro.com for the latest updates, compatible parts and supported conigura

tions.

The BPN-SAS3-846EL1 and BPN-SAS3-846EL2 model backplanes are identical,

except that the BPN-SAS3-846EL2 backplane has duplicate secondary components

which are not found on the BPN-SAS3-846EL1. The BPN-SAS3-846EL2 is divided

into a two sections, with the primary components on the right side of the board and

the secondary components on the left. SAS3 backplanes are not compatible with

legacy SAS (3 Gbps), SATA (1.5 Gbps) backplanes or lower.

E-5 The BPN-SAS3-826EL Rear Backplane

The BPN-SAS3-826EL backplane has been designed to utilize the most up-to-date

technology available, providing your system with reliable, high-quality performance.

This manual relects BPN-SAS3-826EL Revision 1.00, the most current release

available at the time of publication. Always refer to the Supermicro Web site at

www.supermicro.com for the latest updates, compatible parts and supported con-

igurations.

The BPN-SAS3-826EL1 and BPN-SAS3-826EL2 model backplanes are identical,

except that the BPN-SAS3-826EL2 backplane has duplicate secondary components

which are not found on the BPN-SAS3-826EL1. The BPN-SAS3-826EL2 is divided

into a two sections, with the primary components on the right side of the board and

the secondary components on the left. SAS3 backplanes are not compatible with

legacy SAS (3 Gbps) or SATA (1.5 Gbps) backplanes or lower.

Содержание SC847BE1C series





















































































































Результаты поиска

Содержание SC847BE1C series

Отзывы:

Похожие инструкции для SC847BE1C series

Бренды по названию

Популярные бренды

Supero SC847BE1C series, Руководство пользователя

Результаты поиска

Содержание SC847BE1C series

Отзывы:

Похожие инструкции для SC847BE1C series

Бренды по названию

Популярные бренды