Supero SC743i-465B, Руководство пользователя

Страница: 37 / 104

4-17
Chapter 4: Chassis Setup and Maintenance
Using a Phillips head screwdriver, remove the five screws securing the power 3.
supply to the chassis as shown above, and set them aside for later use.
Carefully lift the power supply up and out of the chassis. 4.
Install the replacement power supply in the chassis. 5.
Replace the screws which were set aside previously. 6.
Replace any other components in the chassis that have been removed and 7.
replace the chassis cover before replacing the power cord and powering up
the system.
Figure 4-15: Removing the Interior Chassis Screws on the Power Supply
3
1
4
Remove
Screws