Supero SC512F Series, Руководство пользователя

Страница: 30 / 58

Chassis Manual
5-6
Figure 5-8: Motherboard Placement
Standoffs
Standoffs prevent short circuits by securing space between the motherboard and
the chassis surface. The SC512F chassis includes permanent standoffs in locations
used by most motherboards. These standoffs accept the rounded Phillips head
screws included in the SC512F accessories packaging.
To install the motherboard:
1. Review the documentation that came with your motherboard. Become familiar
with component placement, requirements, precautions, and cable connections.
2. Open the chassis cover.
3. Align the motherboard with the chassis standoffs and carefully, place the moth-
erboard in the chassis. Make sure rear ports line up with the I/O shield.
4. Secure the motherboard to the chassis using the 10 rounded, Phillips head
screws supplied with the accessories kit.
5. Secure the CPU(s), heatsinks, and other components to the motherboard as
described in the motherboard documentation.
6. Connect the cables between the motherboard, backplane, chassis, front panel,
and power supply, as needed.
Flat head
M4 x 4 mm
[0.157]
RAIL
Round head
M4 x 4 mm
[0.157]
Flat head
M5 x 12 mm [0.472]
Washer for M5
DVD-ROM CD-ROM FLOPPY DRIVE
Flat head
6-32 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
Round head
3 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
M/B
Flat head
6-32 x 5 mm
[0.197]
HARD DRIVE
Thumb screw
6-32 x 5 mm [0.197]
M/B standoff
6-32 to 6-32
M/B STANDOFF
M/B (CPU) standoff
M5 to 6-32
Round head
2.6 x 5 mm
[0.197]