Supero SC213A-R720LPB, Руководство пользователя

Страница: 40 / 70

SC213 Chassis Manual
4-20
Figure 4-20: Removing the Screws at the Top of the Backplane
4-14 Removing the Backplane
The SC213 chassis backplane is located behind the hard drives and in front of the
front system fans. In order to change jumper settings on the backplane, it may be
necessary to remove the backplane from the chassis.
Removing the Backplane from the Chassis
Power down and unplug the system from any power source. 1.
Remove the chassis cover. 2.
Disconnect the cabling to the backplane. 3.
Remove all of the hard drives from the hard drive bays in the front of the 4.
chassis
Remove the three upper screws at the top of the backplane, indicated by the 5.
arrows below.
5