Supero PDSLM, Руководство пользователя

Страница: 19 / 81

Chapter 2: Installation
2-3
1. Locate Pin 1 on the CPU, and Pin 1 on
the CPU socket. ( Note : Pin 1 is the corner
marked with a triangle).
2. Align Pin 1 of the CPU against Pin 1 of
the socket. Once aligned, carefully lower
the CPU straight down to the socket. (Do
not drop the CPU on the socket, move the
CPU horizontally or vertically. Do not rub
the CPU against the surface or against
any pins of the socket to avoid damage
to the CPU or the socket.)
3. With the CPU inside the socket, inspect
the four corners of the CPU to make sure
that the CPU is properly installed.
4. Using a Flathead screwdriver, turn the
CPU lock clockwise to secure the CPU
into the CPU socket.
(Warning --To prevent damaging
the CPU socket, do not over-
tighten the CPU lock.)
!
3. Insert the four bracket lock align-
ments into the four mounting holes on
the back of the motherboard.
4. Once the heatsink bracket is prop-
erly seated on the motherboard, turn
the motherboard upside down so that
the front side of the motherboard is
facing up.
Installing the CPU
Heatsink bracket properly
seated on the MB
Pin 1 on the CPU and Pin
1 on the socket
Make sure that the CPU is
properly seated on the MB
Using a Flathead screwdriver,
turn clockwise to lock the CPU