Supero PDSLM, Руководство пользователя

Страница: 24 / 81

2-8
PDSLM User's Manual
Memory Module Installation and Removal
Exercise extreme care when installing or removing memory modules to
prevent any possible damage.
Note 1: SO-DIMMA (JDIMM1) is DIMM Slot 1, SO-DIMMB (JDIMM2) is DIMM
Slot 2.
Note 2: When one memory module is used, install it in DIMM Slot 1 (SO-DIMMA
or JDIMM1) fi rst. If two memory modules are installed, remove the one installed in
DIMM Slot 2 (SO-DIMMB or JDIMM2) fi rst.
1. Insert a memory module at a 45
0
angle
into DIMM Slot 1 (marked 1 on the
right). Align the notch on the memory
module against the notch on the DIMM
slot.
2. Once it is properly aligned, using your
thumb, gently press down on the
middle of the memory module. When
you hear a click, the memory module
is properly seated.
3. If needed, repeat Step 2 to install the
second memory module into DIMM
Slot 2 (marked 2 on the right.)
Memory Module Installation
Top:
1: DIMM Slot 1
2: DIMM Slot 2
Left/Bottom:
1: DIMM Module 1
2: DIMM Module 2
1
1
2
2
1 2
Memory Module Removal
Using your thumbs, push the memory
module locks outwards to release it.
1. Locate the memory module locks on
both ends of the module.
2. Using your thumbs, push the memory
module locks outwards to release the
memory module from the DIMM Slot.
(If two modules are installed, start this
step with DIMM Slot 2 fi rst.)
3. Repeat Step 2 to remove the other mod-
ule, if needed.
1
2
SO-DIMMA
1
2
2
1: Module Notch
2: Module Locks