Supero PDSLM Скачать руководство пользователя страница 16

Страница: 16 / 81

1-10

PDSLM

User’s Manual

1-3 PC

Health

Monitoring

This section describes the PC health monitoring features of the PDSLM. The

motherboard has an onboard System Hardware Monitor chip that supports PC

health monitoring.

Onboard Voltage Monitoring

The onboard voltage monitor will scan these voltages continuously: CPU Core

Voltages, Memory (+1.8V), Chipset (+1.5V), +3.3V, +3.3V Standby, +5V, +5V

Standby, +12V, −12V and VBAT.

Once a voltage becomes unstable, it will give a

warning or send an error message to the screen. The user can adjust the voltage

thresholds to deﬁ ne the sensitivity of the voltage monitor.

Fan Status Monitor with Firmware Speed Control

The PC health monitor can check the RPM status of the cooling fans. The onboard

fans are controlled by Thermal Management via BIOS.

1-4 Power

Conﬁ guration Settings

This section describes the features of Power Conﬁ guration and Power Management

of your motherboard.

BIOS Support for USB Keyboard

If the USB keyboard is the only keyboard in the system, it will function like a normal

keyboard during system boot-up.

1-5 ACPI

Features

ACPI stands for Advanced Conﬁ guration and Power Interface. The ACPI speciﬁ ca-

tion deﬁ nes a ﬂ exible and abstract hardware interface that integrates power man-

agement features with other components of a PC system, including its hardware,

operating system and application software. This enables the system to automati-

cally turn on and off peripherals such as CD-ROMs, network cards and hard disk

drives. This also includes other devices connected to the PC such as VCRs, TVs,

telephones and stereos.

In addition to enabling operating system-directed power management, ACPI

provides a generic system event mechanism for Plug and Play and an operating

system-independent interface for conﬁ guration control. ACPI leverages the Plug

and Play BIOS data structures while providing a processor architecture-indepen-

dent implementation that is compatible with both Windows and Linux Operating

Systems.

Содержание PDSLM


















































































Результаты поиска

Содержание PDSLM

Отзывы:

Похожие инструкции для PDSLM

Бренды по названию

Популярные бренды

Supero PDSLM, Руководство пользователя

Результаты поиска

Содержание PDSLM

Отзывы:

Похожие инструкции для PDSLM

Бренды по названию

Популярные бренды