Supero PDSG4, Руководство пользователя

Страница: 61 / 94

Chapter 4: BIOS
4-7
USB 2.0 Controller
This setting allows you to enable or disable USB 2.0 (EHCI) Controller. The
options are Enabled and Disabled.
USB Legacy Support
This setting allows you to enable or disable the functions of USB, Keyboard/Mouse
under POST and DOS. The options are Disabled and Enabled.
USB KB Wake-up From S3 (S4)
If enabled, the function of Suspend to RAM will be activated to allow the
system store Data in RAM and when there is a system crash, the user will
be able to "wake up" the system via a USB Keyboard. The options are
Disabled and Enabled.
4-4.3
I/O Device Confi guration
KBC Input Clock
This setting allows you to confi gure the KBC Input Clock Settings. The options are
6 MHz, 8 MHz, 12 MHz and 16 MHz .
Onboard FDC Controller
This setting allows you to set the onboard Floppy Disk Controller. The options are
Disabled and Enabled.
Onboard Serial Port1/Onboard Serial Port2
This setting allows the user to set the address and the corresponding IRQ for the
Serial Port1 and Serial Port 2. The options are Disabled , 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3, and Auto. The default setting for Serial Port1 is 3F8/IRQ4
and the default setting for Port 2 is 2F8/IRQ3 .
UART Mode Select
This setting allows the user to select the UART mode for the BIOS. The options
are IrDA, ASKIR and Normal .
Onboard Parallel Port
This setting allows the user to set the address and the corresponding IRQ for
the onboard parallel port. The options are Disabled, 378/IRQ7 , 278/IRQ5 and
3BC/IRQ7.
Parallel Port Mode
This setting sets the mode for the onboard Parallel port. The options are SPP ,
EPP, ECP, ECP+EPP and Normal.
PWRON After PWR-Fail
This setting allows the user to specify how the system will respond when power
is reapplied after the system has gone down due to a power failure. The options
are Off , On and Former-Sts.