Supero C9X299-PG, Руководство пользователя

Страница: 128 / 156

4-56
Supermicro C9X299-PG/-PGF/-RPGF Motherboard User’s Manual
Quiet Boot
Use this feature to select the screen display between POST messages or
the OEM logo at bootup. Select Disabled to display the POST messages.
Select Enabled to display the OEM logo instead of the normal POST mes-
sages. The options are Unchecked and
Checked .
Bootup Num-Lock
Use this feature to set the Power-on state for the Numlock key. The op-
tions are Off and
On .
Option ROM Messages
This feature controls the display mode for Option ROM. The options are
Force BIOS or Keep Current.
INT19 (Interrupt 19) Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function.
When this feature is set to Immediate, the ROM BIOS of the host adaptors
will "capture" Interrupt 19 at bootup immediately and allow the drives
that are attached to these host adaptors to function as bootable disks.
If this feature is set to Postponed, the ROM BIOS of the host adaptors
will not capture Interrupt 19 immediately and allow the drives attached
to these adaptors to function as bootable devices at boot. The options
are
Immediate and Postponed.
Port 61h Bit-4 Emulation
This feature enables port 61h bit-4 toggling in SMM. The options are
Disabled or Enabled.
Wait for "F1" If Error
This feature forces the system to wait until the F1 key is pressed if an
error occurs. The options are Disabled and
Enabled .
Re-try Boot
When EFI Boot is selected, the system BIOS will automatically reboot
the system from an EFI boot device after its initial boot failure. Select
Legacy Boot, to allow the BIOS to automatically reboot the system
from a Legacy boot device after its initial boot failure. The options are
Disabled , Legacy Boot, and EFI Boot.
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when
it is inactive for more than 5 minutes. The options are
Disabled and
Enabled.