Supero C7SIM-Q, Руководство пользователя

Страница: 58 / 107

2-34
C7SIM-Q User's Manual
JPUSB2
USB Wake-Up
Use the JPUSB jumpers to enable the function of
"System Wake-Up via USB devices", which allows
you to "wake-up" the system by pressing a key
on the USB or PS/2 keyboard or by clicking the
USB or PS/2 mouse of your system. The JPUSB
jumpers are used together with the USB Wake-Up
function in the BIOS. Enable both the jumpers and
the BIOS setting to allow the system to "wake-up
via USB Devices". See the table on the right for
jumper settings and jumper connections.
Note 1: JPUSB1 is for Back Panel USB ports
0~7 and PS/2 ports, while JPUSB2 is for Front
Panel USB ports 10~13.
Note 2: The default jumper setting for the USB
ports is "Disabled". However, when the "USB
Wake-Up" function is enabled in the BIOS,
and the desired USB ports are enabled via
the JPUSB jumper, please be sure to remove
all USB devices from the USB ports whose
USB jumpers are set to "Disabled" before the
system goes into the standby mode.
JPUSB1 (Back Panel USB
Wake-up)
Pin# Definition
1-2 Enabled (*default)
2-3 Disabled
A
B
A. JPUSB1
JPUSB2
A
B