Supero C7SIM-Q, Руководство пользователя

Страница: 36 / 107

2-12
C7SIM-Q User's Manual
JPUSB2
Memory Banks
2-4 System Memory
CAUTION
Exercise extreme care when installing or removing
DIMM modules to prevent any possible damage.
How to Install DIMMs
Insert the desired number of DIMMs into the memory slots, starting with 1.
DIMM1A (Channel 1, DIMMA - see the Figure below), then DIMM2A, DIMM1B
& DIMM2B. Insert each DIMM module vertically into its slot. Pay attention to
the notch along the bottom of the module to prevent incorrect DIMM module
installation.
Gently press down on the DIMM module until it snaps into place in the slot. 2.
Repeat step 1 to install DIMM1B/DIMM if needed. See Page 2-13 for details.
Memory Support
The C7SIM-Q supports up to 16GB of DDR3 Non-ECC UDIMMs (1333/1066/800
MHz) in 4 DIMM slots. Populating these DIMM slots with a pair of memory mod-
ules of the same type and same size will result in interleaved memory, which will
improve memory performance.
Note : Check the Supermicro website for a list of memory modules that
have been validated with the C7SIM-Q motherboard.
JPUSB2
Channel 1, DIMM A
(DIMM1A)
Channel 2, DIMM A
(DIMM2A)
Channel 1, DIMM B
(DIMM1B)
Channel 2, DIMM B
(DIMM2B)