Supero C2SBC-Q, Руководство пользователя

Страница: 68 / 87

4-14
C2SBC-Q User's Manual
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are
Enabled and Disabled .
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefit from a greater clock rate. The options are Default ,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novelle and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you might want to change this setting and try
again. A different OS requires a different Bus Master clock rate
.

PEG (PCI-Express Graphics) Port Sub-menu (Slot 7)
Access the submenu for each of the settings above to make changes to the
following:
PCI-Express Graphics (PEG) Port (This submenu is for debugging only.)
Select Auto to automatically enable the PCI-Express Graphics Port if a PCI
add-on card is detected. Select Disabled to always disable the PEG Port. Select
Enabled to always enable the PEG Port. (Debugging is enabled if a Debug card
is detected.) The default setting is
Auto .
When the PCI-Exp. Graphics Port is enabled, the following items will be dis-
played:
PEG Port Enabled=
PEG Port Number=
PEG Port Width=
PEG Port Slot Number=
PEG Port Power Limit=
PEG Port Slot Detect=

Onboard LAN 1, LAN 2
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and
Disabled .
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are
Enabled and Disabled .