Supero C2SBC-Q, Руководство пользователя

Страница: 43 / 87

Chapter 2: Installation
2-25
FAN1
JI2C2
JWOR
JPL1
JF1
JWD
JLED
Battery
DIMM1A DIMM2A DIMM1B DIMM2B
I-SATA2
I-SATA3
SPEAKER
COM1
KB/MOUSE
CPU Fan
VGA
USB 2/3/4/5
Audio
J41
LGA 775 CPU
Slot7 PCI-E x16
Slot6 PCI-33MHz
JPL2
Slot3 PCI-33MHz
Slot2 PCI-33MHz
JP2
Buzzer
Slot1 PCI-33MHz
JPUSB2
IDE
FP USB 8/9 FP USB 6/7
I-SATA4
I-SATA5
JL1
LE1
Intel Q35
Intel ICH9
Audio CTRL
CD-IN
COM4
Front Audio
W83627DHG
Printer
S I/O 1
IDE CTRL
ITE 8213
COM3 COM2
USB 10 USB 11
JWOL
I-SATA0
I-SATA1
FAN2
W83627DHG
S I/O 2
Fan3
JPUSB1
LAN 1
Slot5 PCI-E x4
Slot4 PCI-33MHz
JP5
JI2C1
JSMB
LAN 2 CTRL
LAN 1 CTRL
JBT1
USB 0/1
LAN 2
ATX Power
C2SBC-Q
USB Wake-Up
Use JPUSB jumpers to enable the function of
"System Wake-Up via USB devices", which al-
lows you to "wake-up" the system by pressing a
key on the USB keyboard or by clicking the USB
mouse of your system. The JPUSB jumpers are
used together with the USB Wake-Up function in
the BIOS. Enable both the jumpers and the BIOS
setting to allow the system to "wake-up via USB
Devices". See the table on the right for jumper
settings and jumper connections.
Note : JPUSB1 is for Back Panel USB
ports:0/1/2/3/4/5, and JPUSB2 is for Front
Panel USB ports:6/7/8/9 and 10/11.)
The default jumper setting for the USB ports is
Disabled . However, when the "USB Wake-Up"
function is enabled in the BIOS, and the desired
USB ports are enabled via the JPUSB jumper,
please be sure to remove all USB devices from
the USB ports whose USB jumpers are set
to "Disabled" before the system goes into the
standby mode.
JPUSB1 (Back Panel USB
Wake-up)
Pin# Definition
1-2 Enabled (Default)
2-3 Disabled
JPUSB2 (Front Panel USB
Wake-up)
Pin# Definition
1-2 Enabled
2-3 Disabled (default)
A. JPUSB1
B. JPUSB2
A
B