Supero AOC-LPZCR2, Руководство пользователя

Страница: 20 / 66

3-4
AOC-LPZCR2 All-In-One Card User's Manual
To Create Arrays
(* Note: Make sure that the disks you want to use for the arrays are connected
to your system and are initialized. A disk shown in the gray area is not initial-
ized or it can be a member of an array already, so it cannot be used for an
array at this point. Please refer to the section "Initializing Disk Drives" for disk
initialization.)
1. Turn on your computer. When prompted, press <Ctrl> and <A> to access the
Adaptec RAID Utility.
2. From the RAID Confi guration Menu (Figure 3.1 on Page 3-3), select "Array
Confi guration Utility" and press <Enter>. The Array Confi guration Utility Main
Menu (Figure 3.2) will display.
3. Select "Create Array" and hit <Enter> as shown above. The Create Array
submenu will display as shown on the next page.
Figure 3.2 The Array Confi guration Utility Main Menu