manualshive.com logo in svg

Supero 5037MR, Руководство пользователя

Поделиться
Скачать
Supero 5037MR Скачать руководство пользователя страница 83

Chapter 7: BIOS

4-11

Device Tagging

 

This feature enables Device Tagging. The options are Enabled and 

Disabled

.

Thermal Throttling

This feature selects from the different throttling methods. The options are Dis-
abled and 

CLTT

 (Closed Loop Thermal Throttling).

X

South Bridge Con

fi

 guration

This item displays the current South Bridge Revision.

All USB Devices

This feature enables all USB ports/devices. The options are 

Enabled

 and Dis-

abled. When set to enabled, EHCI Controller 1 and 2 (below) become available.

EHCI Controller 1 / EHCI Controller 2

This feature enables the Enhanced Host Controller Interface (EHCI). The options 
are 

Enabled

 and Disabled.

Legacy USB Support

This feature enables support for legacy USB devices. Select Auto to disable 
legacy support if USB devices are not present.  Select Disabled to have USB 
devices available only for EFI applications. The options are 

Enabled, 

 Disabled 

and Auto.

Port 60/64 Emulation

This feature enables I/O port 60h/64h emulation support. This should be enabled 
for complete USB keyboard legacy support for non-USB aware Operating Sys-
tems. The options are 

Enabled, 

and Disabled.

EHCI Hand-Off

This item is for Operating Systems that does not support Enhanced Host Con-
troller Interface (EHCI) hand-off. When enabled, EHCI ownership change will be 
claimed by the EHCI driver. The settings are Enabled and 

Disabled

.

Содержание 5037MR











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды