Supermicro X12SPG-NF Скачать руководство пользователя страница 85

Страница: 85 / 112

Chapter 4: BIOS

SHA-1 PCR Bank

Use this feature to disable or enable the SHA-1 Platform Configuration Register (PCR) bank

for the installed TPM device. The options are Disabled and

Enabled

SHA256 PCR Bank

Use this feature to disable or enable the SHA256 Platform Configuration Register (PCR) bank

for the installed TPM device. The options are Disabled and

Enabled

Pending Operation

Use this feature to schedule a TPM-related operation to be performed by a security device
for system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are

None

and

TPM Clear.

Platform Hierarchy

Use this feature to disable or enable platform hierarchy for platform protection. The options
are Disabled and

Enabled

Storage Hierarchy

Use this feature to disable or enable storage hierarchy for cryptographic protection. The
options are Disabled and

Enabled

Endorsement Hierarchy

Use this feature to disable or enable endorsement hierarchy for privacy control. The options
are Disabled and

Enabled

TPM 20 Interface Type

PH Randomization

Use this feature to disable or enable Platform Hierarchy (PH) Randomization. The options
are

Disabled

and Enabled.

Disable Block sid

Select Enabled to allow SID authentication be performed in TCG Storage devices. The options
are Enabled and

Disabled

SMCI BIOS-Based TPM Provision Support

Use this feature to enable the Supermicro TPM Provision support. The options are

Disabled

and Enabled.

TXT Support

Intel Trusted Execution Technology (TXT) helps protect against software-based attacks and

ensures protection, confidentiality, and integrity of data stored or created on the system. Use

this feature to enable or disable TXT Support. The options are

Disabled

and Enabled.

Содержание X12SPG-NF

















































































































Результаты поиска

Содержание X12SPG-NF

Отзывы:

Похожие инструкции для X12SPG-NF

Бренды по названию

Популярные бренды

Supermicro X12SPG-NF, Руководство пользователя

Результаты поиска

Содержание X12SPG-NF

Отзывы:

Похожие инструкции для X12SPG-NF

Бренды по названию

Популярные бренды