Supermicro X12SPG-NF Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 112

background image

17

Chapter 1: Introduction

Onboard Voltage Monitors

An onboard voltage monitor will scan the voltages of the onboard chipset, memory, CPU,
and battery continuously. Once a voltage becomes unstable, a warning is given, or an error

message is sent to the screen. The user can adjust the voltage thresholds to define the

sensitivity of the voltage monitor.

Fan Status Monitor with Firmware Control

The system health monitor embedded in the BMC chip can check the RPM status of the
cooling fans. The CPU and chassis fans are controlled via lPMI.

Environmental Temperature Control

System Health sensors monitor temperatures and voltage settings of onboard processors
and the system in real time via the IPMI interface. Whenever the temperature of the CPU or

the system exceeds a user-defined threshold, system/CPU cooling fans will be turned on to

prevent the CPU or the system from overheating.

Note

: To avoid possible system overheating, please be sure to provide adequate air-

flow to your system.

System Resource Alert

This feature is available when used with SuperDoctor 5

®

in the Windows OS or in the Linux

environment. SuperDoctor is used to notify the user of certain system events. For example,

you can configure SuperDoctor to provide you with warnings when the system temperature,
CPU temperatures, voltages and fan speeds go beyond a predefined range.

1.5 ACPI Features

The Advanced Configuration and Power Interface (ACPI) specification defines a flexible and

abstract hardware interface that provides a standard way to integrate power management
features throughout a computer system, including its hardware, operating system and

application software. This enables the system to automatically turn on and off peripherals

such as CD-ROMs, network cards, hard disk drives and printers.
In addition to enabling operating system-directed power management, ACPI also provides a
generic system event mechanism for Plug and Play, and an operating system-independent

interface for configuration control. ACPI leverages the Plug and Play BIOS data structures,

while providing a processor architecture-independent implementation that is compatible with
appropriate Windows operating systems. For detailed information regarding OS support,
please refer to the Supermicro website.

«
...
15
16
17
18
19
...
»

Содержание X12SPG-NF

















































































































Отзывы:

Нет отзывов

Похожие инструкции для X12SPG-NF

Бренд: Gigabyte Страницы: 8

Бренд: IEI Technology Страницы: 140

Бренд: Biostar Страницы: 166

Бренд: JETWAY Страницы: 70

Бренд: AOpen Страницы: 8

Бренд: Gigabyte Страницы: 40

Бренд: Infineon Страницы: 11

COMe Ref.Carrier T6

Бренд: Kontron Страницы: 41

GA-H170M-HD3 DDR3

Бренд: Gigabyte Страницы: 44

Бренд: PC Partner Страницы: 20

Бренд: Gigabyte Страницы: 32

Бренд: Maxus Страницы: 59

LPC1768-Xplorer

Бренд: NGX Technologies Страницы: 25

Бренд: TYAN Страницы: 100

Бренд: Advantech Страницы: 4

Бренд: Gigabyte Страницы: 39

Бренд: WinSystems Страницы: 16

Бренд: C&T Solution Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды