Super X12SPG-NF User's Manual
74
Support Aggressive Link Power Management
When this feature is set to Enable, the SATA AHCI controller manages the power usage of
the SATA link. The controller puts the link in a low power mode during extended periods of I/O
inactivity and then returns the link to an active state when I/O activity resumes. The options
are
Disable
and Enable.
SATA RAID Option ROM/UEFI Driver
Select UEFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for
system boot. The options are Disable,
EFI
, and Legacy.
M.2-H_1/M.2-H_2
M.2-H_1/M.2-H_2 Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disable
and Enable.
SATA Device Type
Use this feature to specify if the SATA port specified should be connected to a Solid State
Drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State Drive.
PCH sSATA Configuration
sSATA Controller
This feature enables or disables the onboard SATA controller supported by the Intel PCH
chip. The options are
Enable
and Disable.
Configure sSATA as
Select AHCI to configure an sSATA drive specified as an AHCI drive. Select RAID to configure
an sSATA drive specified as a RAID drive. The options are
AHCI
and RAID.
*If the feature above is set to RAID, the sSATA RSTe Boot Info and sSATA RAID Option
ROM/UEFI Driver are available for configuration:
sSATA RSTe Boot Info
Select Enable to provide full int13h support for the devices attached to sSATA controller. The
options are Disable and
Enable
.
Support Aggressive Link Power Management
When this feature is set to Enable, the SATA AHCI controller manages the power usage of
the SATA link. The controller puts the link in a low power mode during extended periods of I/O
inactivity and then returns the link to an active state when I/O activity resumes. The options
are
Disable
and Enable.