Supermicro X12SCZ-F, Руководство пользователя

Страница: 90 / 142

Super X12SCZ-TLN4F/QF/F User's Manual
90
Device Settings
This feature displays the status of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto , (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4;),
(IO=3E8h; IRQ=4;), and (IO=2E8h; IRQ=4;).

Serial Port 2 Configuration
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled .
Device Settings
This feature displays the status of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto , (IO=3F8h; IRQ=3;), (IO=2F8h; IRQ=3;),
(IO=3E8h; IRQ=3;), and (IO=2E8h; IRQ=3;).
Serial Port 2 Attribute (Available for Serial Port 2 only)
Select SOL to use COM Port 2 as a Serial Over LAN (SOL) port for console redirection.
The options are
SOL
and COM.

Network Configuration

MAC:XXXXXXXXXXXX-IPv4 Network Configuration
Configured
This feature indicates whether a network address is configured successfully or not. The
default is
Unchecked
.
*If the feature above is set to Checked, the following features below will be available
for configuration:
Enable DHCP
Use this feature to set the DHCP. The default is Unchecked.