Supermicro X11SPD-F, Руководство пользователя

Страница: 70 / 116

Super X11SPD-F User's Manual
70
LLC Dead Line Alloc
Select Enable to optimally fill dead lines in LLC. Select Disable to never fill dead lines in
LLC. The options are Disable, Enable , and Auto.
Isoc Mode
Isochronous (Isoc) mode allows time-sensitive processes to be given priority. The options
are Disable, Enable, and
Auto .

Memory Configuration
Enforce POR
Select POR (Plan of Record) to enforce POR restrictions on DDR4 frequency and volt-
age programming. The options are
POR
and Disable.
PPR Type
Use this feature to set the Post Package Repair type. The options are Auto , Hard PPR,
Soft PPR, and PPR Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are
Auto , 1866, 2000, 2133, 2400, 2666, and 2933.
Data Scrambling for DDR4
Use this feature to enable or disable data scrambling support for DDR4. The options are
Auto , Disable, and Enable.
tCCD_L Relaxation
Select Auto to get TCDD settings from SPD (Serial Presence Detect) and implement into
memory RC code to improve system reliability. Select Disable for TCCD to follow Intel
POR. The options are
Auto and Enable.
2X REFRESH
Use this feature to select the memory controller refresh rate to 2x refresh mode. The
options are
Auto
and Enable.
Page Policy
This feature allows the user to determine the desired page mode for IMC. When Auto is
selected, the memory controller will close or open pages based on the current operation.
Closed policy closes that page after reading or writing. Adaptive is similar to open page
policy, but can be dynamically modified. The options are Auto , Closed, and Adaptive.